installation process
Terminals with press-in process range from 2 to 12pin, and the pin pitch is 3.81/5.08mm. It is only necessary to simply press the pins into the terminals of the PCB board.
Wiring Features
The thickness of the PCB suitable for the terminal block should be at least 1.5mm and meet the standard requirements of DIN EN 60 352-5-1995-9. Its locating pins reliably speed up the press-in operation; at the same time, it resists torque, especially when the number of positions is small.
Application field
The press-in process fixed terminal NCDS adopts screw connection method. It does not need to be welded during installation. It can be connected to wires with a diameter of 2.5mm2. In addition to being used on traditional PCBs, it is especially suitable for SMD process PCBs.
